Protect Your Home and Health From Radon

protect your home and health from radon

Though you cannot see, smell or taste radon, it can still be present in your home. According to the U.S. Environmental Protection Agency (EPA), when you breathe radon-contaminated air, you increase your risk of developing lung cancer. In fact, the U.S. Surgeon General warns that radon is the second-leading cause of lung cancer in this country next to smoking.

This problem is not isolated to one geographic area or to a certain type of house. It is estimated that nearly one out of every 15 homes in the United States has an elevated radon level, which poses potentially serious health risks.

What Is Radon?

Radon is a naturally occurring radioactive gas produced by the breakdown of uranium in soil, rocks and water. Since the air pressure inside of your home is generally lower than the pressure in the soil around the foundation, your house acts as a vacuum, drawing the gas in through cracks in the foundation and other openings.

It may also be present in your water source and can consequently be ingested when drinking or released into the air when water is used for general household purposes, like showering.

Since you cannot see or smell radon gas, testing is the only way to determine if the air and water in your home contains it.

Why Should I Be Concerned About Radon?

The National Cancer Institute reports that radon is the second-leading cause of lung cancer in the United States. The prevalence of radon is not isolated to one geographic area or type of home. In fact, one in every 15 homes has an elevated radon level, so it’s important for you to test and eliminate radon dangers at your residence. Ensure that your family is breathing easy by testing for radon and installing a radon mitigation system if the gas levels in your home are too high.

The EPA reports that radon presence can vary by day, season and geographic area. It can even vary in a small area such as between you and your next-door neighbor’s home. The level of radon ultimately depends on the local geology, how houses were built and the materials that were used to construct them.

Before purchasing a home, the EPA recommends that you test its air and water quality. If the seller has already tested the home for radon, obtain the results to determine if the levels are too high. If the home has not been tested for radon, it is wise to have the levels checked before agreeing to buy. Here are some other instances in which you should have the home tested:

  • The home was never tested.
  • The home was tested more than two years ago.
  • The home was renovated since it was last tested.
  • You plan to occupy a lower level of the home than what was originally tested, such as the basement.

How Do I Test for Radon?

To test a home for radon, you can order a kit by mail from a qualified radon measurement service provider, purchase a test kit from a local hardware store or hire a qualified tester (often also a home inspector). For information on testing in Colorado, or to order a discounted test kit, visit the Colorado State Radon site here.

Passive devices:

These devices, which do not require power to function, are exposed to the air in the home for a specific period of time and are then sent to a lab for analysis. They are generally fairly inexpensive and are popular testing options for home inspectors.

Active devices:

These devices continuously measure and record the amount of radon in the air. They report unusual or abnormal swings in the radon level over a period of time, which can be explained by a qualified tester. These tests are generally more expensive but are also more reliable since they are designed to deter test interference.

Testing duration:

Both passive and active test models are available for short- and long-term testing, which yield slightly different results.

Short-term testing:

These devices remain in the home for two to 90 days, depending on the test. They are generally used in a real estate transaction when results are needed quickly.

Long-term testing:

These devices remain in the home for more than 90 days and provide a reading that is more comparable to the year-long average radon reading versus a reading during a particular season. They are used to confirm short-term test results.

Testing recommendations:

Conduct a radon test for a minimum of 48 hours. Follow the specific time constraints as outlined by the test you choose. Close your house to the outdoors (windows and doors) for at least 12 hours prior and during a short-term test. Operate your home’s heating and cooling system as you would normally, except when conducting a short-term test lasting less than a week. Then, only use air-conditioning units that re-circulate indoor air only. Do not disturb the testing device.

If you conduct the test on your own, promptly send in the unit and all the required information (test location, start and stop times, etc.) to the laboratory as soon as the test is complete.

What Should I Do Next?

If a radon test reveals that your home’s level is dangerous, you can install a radon mitigation system.  A qualified radon reduction contractor can install a system in typically less than a day. If your home’s water source has high levels of radon, too, a point-of-entry treatment device can be installed to reduce emissions.

A qualified radon reduction contractor can install a radon mitigation system in your home for approximately $800 to $2,500. If your home’s water source has high levels of radon, the contractor can install a point-of-entry water treatment device. In doing so, you will reduce the risk of getting lung cancer by lowering the level of radon in your home.